meh

101

Friday, June 20, 2014

Baby Booties

These little ballet-slipper style booties can be made to match the baby cap posted earlier (Oh, Baby Baby cap, March 28, 2013).  The booties shown here are sized for a 3-6 month old baby.  Size can be adjusted for a smaller or larger baby foot.
Materials
Soft acrylic or washable sock-weight yarn blend of merino, acrylic and baby alpaca. 
U.S. 5 or 6 (3.75-4.0 mm) knitting needles
Tapestry needle
Instructions
Cast on 45 sts
Knit all sts for 12 rows
K 19, k2tog, K3, k2tog, K19
K 18, k2tog, K3, k2tog, K18
K17, k2tog, K3, k2tog, K17
K16, k2tog, K3, k2tog, K16
K15, k2tog, K3, k2tog, K15
You have now finished the base of the bootie and are ready to bind off the front portion:
K8, bind off 19, K8
Next you will make the bootie strap by casting on new stitches in the middle:
K8, cast on 8 sts (as done at start of project), K8
K all sts for 4 rounds
Bind off all sts very loosely so the strap will be stretchable over baby’s foot and ankle.  Cut yarn with 18 inches remaining.
To finish, fold the bootie in half (right sides together) and use the tapestry needle and remaining yarn end to join the back and bottom edges of the bootie with a single seam.  Cut yarn and weave in loose ends.  Turn right side out.  You can embellish with a small yarn bow if you’d like. 

Sunday, February 23, 2014

Dog Sweater

This basic two-panel sweater is easy to make and can be embellished with an optional turtleneck or leg cuff ribbing.  My little dog Mille is shown here in a basic pink sweater with no leg or neck ribbing.  If you’re feeling a little more adventurous and a simple sweater just won’t do for your pooch then try the cabled sweater variation also modeled by Millie and described at the end of the instructions. 
 A thick worsted wool yarn will keep your pooch warm and cozy during winter walks or romps in the yard. 
Dog Sizes (approximate)  - represented in pattern as S (M, L, XL)
Small   6-10 lbs
Medium  10-20 lbs
Large  20-40 lbs
Extra Large 40-75 lbs

Materials
Worsted weight yarn, 220 (440, 440, 660) yds
Size 7 (4.5 mm) dpns
Size 5 (3.74 mm) dpns or 24 inch circular needle
Tapestry needle
Stitch holder (cable needle)

Sweater Back
To start the neck edge, CO 48 (66, 88, 98) sts onto larger dpns. 
K row 1, P row 2 and continue in stockinette stitch until piece measures approximately 8 (12, 16, 18) in, ending with P row (WS).
Decrease sweater back with following pattern:
Row 1:  K1, K2tog, K across until last 3 sts, K2tog, K1
Row 2:  P all sts
Repeat pattern 8 (10, 12, 12) times until piece measures approx 12 (16, 21, 23) inches. 
Loosely bind off all sts.

Underpanel
CO 7 sts onto larger dpns.  Work this panel in K1 P1 ribbing as follows:
Row 1:  K1, P1; repeat until end
Row 2: P1, K1; repeat until end
Row 3:  KFB, P1, then K1, P1 until last st, KFB
Continue this 3-row pattern increasing 1 st at each edge every 3rd row 7 (9, 13, 16) times until 21 (25, 33, 39) sts are on the needle. 
Continue in K1 P1 pattern until piece measures 8 (12, 16, 18) from CO edge.
Place all sts onto holder.

Assembling
Thread the tapestry needle and align the straight edges of the sweater back to the underpanel (right sides together).  Stitch pieces together, leaving a 2 (2.5, 3, 3.5) inch opening for the legs starting approximately 3 (5, 7, 8).

Finishing
Neck edge
On RS of sweater, pick up 52 (64, 72, 82) sts evenly onto smaller dpns or circular needle around the neck edge. Work in K1 P1 ribbing until desired length is reached according to styles below:
Crew Neck – ¾ inch ribbing
Mock Turtleneck – 1.5 inch ribbing
Turtleneck – 3 inch ribbing
Bind off all sts

Leg Cuffs (optional)
 With dpns pick up 24 (28, 30, 36) sts evenly around leg opening.  Work in K1 P1 ribbing for 5 rounds. Bind off sts.

Lower Sweater edge
Using circular needle, pick up 82 (110, 136, 166) sts around lower edge of sweater including all sts on the needle holder.  Matching the pattern of the underpanel, work 5 rounds in K1 P1 ribbing.  Bind off sts loosely. 

Cable Knit Variation
Sweater Back
To start the neck edge, CO 48 (66, 88, 98) sts onto larger dpns. 
Row 1: K all sts
Row 2:  P all sts
Start this 6 row Cable Pattern (shown for size small, adjust accordingly for other sizes):
Row 1:  K18, P1, K4, P2, K4, P1, K18 to finish row
Row 2:  P18, K1, P4, K2, P4, K1, P18 to finish row
Row 3:  K18, P1, C4F, P2, C4B, P1, K18 to finish row
Row 4:  P18, K1, P4, K2, P4, K1, P18 to finish row

Row 5:  K18, P1, K4, P2, K4, P1, K18 to finish row
Row 6:  P18, K1, P4, K2, P4, K1, P18 to finish row
Continue in cable pattern until piece measures approximately 8 (12, 16, 18) inches ending with P row (WS).
Decrease sweater back following the same cable pattern with following modifications:
Row 1, 3 and 5:  K1, K2tog, K across until last 3 sts, K2tog, K1
Repeat pattern 8 (10, 12, 12) times until piece measures approx 12 (16, 21, 23) inches. 
Loosely bind off all sts.  Finish as above. 

Abbreviations:
CO – cast on
Dpns – double pointed needles
K – knit
K2tog – Knit 2 sts together to decrease stitch count by one
KFB – knit the front and back of the same st to increase st count by 1
P – purl
RS – right side
St - stitch
WS – wrong side
CFB - slip 2 sts onto cable needle and hold in back while K2 from left needle, then K2 from cable needle
C4F - slip 2 sts onto cable needle and hold in front while K2 from left needle, then K2 from cable needle



Sunday, February 2, 2014

Football

This soft and squishy knit football means no longer having to tell the boys and men in your life that they cannot play ball in the house!  This will also makes a nice toy for that special dog especially if you can find a squeaker to tuck inside.

Materials
One skein worsted weight yarn in medium brown
 One set double pointed needles (DPN) size US 5 (3.75 mm)
White or ivory scrap yarn for football laces
Tapestry needle
Polyester fiberfill for stuffing

Instructions  for  a football approximately 7 inches by 4 inches
Using 3 DPNs, cast on 6 sts and divide so there are 2 sts on each needle


Join ends to make a circle making sure the sts are not twisted.
K one round
KFB around (12 sts)
K 2 rounds
K1, KFB; repeat pattern around (18 sts)
K 2 rounds
K2, KFB; repeat pattern around (24 sts)
K 2 rounds
Continue this pattern 6 more times until there are 60 sts total:
 K (prior number +1), KFB around 
K 2 rounds
You’ve now reached the widest portion of the football.  Add a scrap of yarn to mark your starting point and then continue knitting around for 15 rounds or until this mid-section measures about 2 inches.
It’s now time to decrease the rounds in a similar though opposite way as the stitching was
increased, but first stuff the portion of the football you have completed with the fiberfill.  Stuff it fully and firmly but without distorting the shape of the ball or pulling the stitches apart. 
K8, K2tog;  Continue pattern around (54 sts)
K 2 rounds
K7, K2tog;  Continue pattern around (48 sts)
K2 rounds
Continue this pattern 6 more times until 12 sts remain, adding more stuffing after every 4-6 rounds:
 K (prior number - 1), KFB around 
K 2 rounds
Finish stuffing to desired fullness, checking the shape to be sure it is football-like.
 K2tog all around (6 sts)
Cut yarn, leaving 4 inches.  Thread tapestry needle and pass through all sts.  Pull tight and tie off.  Pass through center

Football laces
Mark placement of your stitches with safety pins.  Thread your needle and stitch the long, lengthwise lace first.  Stitch the short crosswise laces over the long lace as shown, passing yarn on the inside between stitches.  Tie a knot, cut yarn and tuck end between sts into ball.   

Abbreviations
DPN – double-pointed needles
K – Knit
K2tog – Knit two stitches together to reduce stitch count by one
KFB – knit into the front and back of the same stitch to increase stitch count by one
Sts – stitches


Tuesday, January 28, 2014

Checkered Mittens


These thick and colorful mittens are easier to make than you might think!   Although they can be made in any combination of 3 colors, it looks nice to have two colors that complement one another and one neutral contrast color such as white or beige.  This pattern will make size medium women’s mittens. 
Materials
One set of size 6 (4 mm) double-pointed needles
Tapestry Needle
Three 50 gram skeins of worsted weight yarn (approx 150 yds each).  For the mittens shown, the main color (MC) yarn used was Manos silk (70% extra fine merino, 30% silk) in blue;  contrast color 1 (CC1) was Manos silk yarn in powder and contrast color 2 (CC2) was Rowan cocoon (80% merino wool, 20% kid mohair) in polar.
Scrap of yarn in different color to mark thumb opening
Mitten Mania

Cuff
Using CC1, loosely cast on 48 sts.  Join ends being careful not to twist sts.  Work 2 rounds in K2 P2 ribbing.  Change to CC2 and work 1 round of K2 P2.  Change to MC and continue in K2 P2 ribbing until cuff measures 2 inches.

Hand
Work the following 18 rounds of pattern sts:
Rounds 1, 2, 8, 9, 10, 11, 17 and 18:  Knit all sts in MC
Rounds 3, 4, 15 and 16:  K2 in MC, K2 in CC2;  repeat for entire round
Rounds 5 and 14:  Knit all sts in CC1
Rounds 6, 7, 12 and 13:  K2 CC2, K2 MC;  repeat  for entire round

Work Round 1 again.
Round 2:  To mark the thumb opening that you will use later, K2 sts in MC, then K next 9 sts using piece of the scrap yarn.  Slip these 9 sts back to the left needle and K them again in MC; continue working to end of round.
Continue with remaining 16 rounds of pattern above.

Work pattern a third time for rounds 1-13
To decrease the fingertip end of mittens:
Round 14:  Using CC1 K2tog around (24 sts remain)
Rounds  15 and 16: K1 MC, K1 CC2, repeat for rest of round
Round 17:  Using MC, K2tog around (12 sts remain)
Round 18:  Using MC, K2tog around (6 sts remain)
Cut yarn, leaving 5 inches.  Thread tapestry needle and pass through all sts.  Pass through center, pull tight and tie off. 

Thumb
Carefully remove the scrap yarn from the thumb opening one stitch at a time, slipping the top 9 sts onto one DPN and the bottom 9 sts onto a different DPN.  Starting with the bottom needle and MC yarn, K9 and then pick up and K1 st from side of opening.  K9 sts from upper needle and pick up and K1 st from other side of opening.  Use scrap yarn to mark end of round (20 sts).   
Divide sts evenly on 3 DPNs.  Continue with rounds 3 to 18 of pattern. 
Knit round 1 again in MC.
Round 2:  K2tog in MC, K2tog in CC2; repeat around (10 sts)
Round 3:  Using CC1 K2tog, K3; repeat around (8 sts)
Round 4:  K2tog in MC around (4 sts).  Cut yarn, leaving 3 inches.  Thread tapestry needle and pass through all sts.  Pass through center, pull tight and tie off.   Use remaining yarn end to draw together gaps in sts around thumb opening. 

Repeat to make another mitten. 

Abbreviations
CC1 – contrast color 1
CC2 – contrast color 2
DPN – double-pointed needles
K – Knit
K2tog – Knit two stitches together
MC – main color
P - purl
St – stitches


This pattern was adapted from “60 More Quick Knits” by Sixth and Spring Books.